What details should be paid attention to during the installation process of Low power underground light?

Publish Time: 2024-05-23
During the installation process of Low power underground light, it is indeed necessary to pay attention to many details to ensure its safe and stable operation and to fully exert its lighting effect. Here are some key details to note when installing a Low power underground light:

Site selection and safety assessment: Before installation, a suitable site must be selected and ensure that there are no wires, pipes or other obstructions underneath the chosen location. At the same time, evaluate the load-bearing capacity of the ground to ensure that the underground lights can be stably installed on the ground.

Foundation pit preparation: According to the size of the underground light, dig a foundation pit with a depth and width slightly larger than the base of the underground light. The bottom of the foundation pit should be flat to facilitate the placement and fixation of the floor lamp base.

Cable connection: Make sure the cable comes out of the base of the floor light and connects to the power cord. When connecting cables, make sure the connection is firm and reliable, and use waterproof connectors and waterproof tape to prevent moisture intrusion.

Install the base: Place the floor lamp base in the pre-dug foundation pit and adjust its position so that it is level with the ground. The base is then secured into the excavation using concrete or other suitable material.

Install the lamp body: Install the floor lamp body on the base and adjust its angle and direction to achieve the best lighting effect. During installation, care should be taken not to damage the lamp body or cables.

Fixation and stability: Use bolts and nuts to fix the floor lamp body to the base to ensure the stability and safety of the floor lamp. At the same time, check whether all fixing parts are firm to prevent the lamp body from loosening or shaking.

Power connection and test: Connect the power cord of the floor lamp to the power switch, and turn on the power switch to check whether the floor lamp is operating normally. During the test, attention should be paid to whether the brightness and color of the light meet the requirements.

Waterproofing and Drainage: Since underground lights are in an environment susceptible to moisture, waterproofing measures are crucial. During installation, ensure that all cable joints and interfaces are waterproofed. In addition, attention should be paid to drainage design to prevent water accumulation from affecting the normal operation of the lamps.

Maintenance and maintenance: After installation, the underground lights should be maintained and maintained regularly, such as cleaning the lamp body, checking the cable connections, etc. This helps extend the life of the floor lamp and maintains its good lighting effect.

In short, when installing Low power underground light, you need to carefully consider the above details and ensure that each step is correct. Only in this way can the safe and stable operation of the floor lamp be ensured and its lighting effect fully exerted.

Contact Us